Chevrolet with Old Carter Carburetors : CHEVROLET 1932 1933 1934Previous | Home | Next |
 |
Page 4 .
CARBURETER SPECIFICATIONS
Bore and Stroke: 1932 Carbureters 2125 - 2225 - 222SA - 235S-3 5/16" Bore;
3 3/4" Stroke (All models)
1933-34 Carbureters 260S - 285S -3 5/16" Bore; 3 1/2" Stroke (Fleet
models)
1933-34 Carbureters 2595-2845 -3 5/16" Bore; 4" Stroke (Cars and
trucks)
1932 1932 1932 1933 1933 1934 1934
Dr. Drill Size t Early Production
• No. 32 Dr. Counterbored 1/4" Deep. $ Late Production
1932 212S
DIMENSIONS:
Flange Size, S. A. E
Primary Venturi, I. D.-. _.
Venturi, I. D
Main Venturi, I. D
_. FLOAT LEVEL OUTSIDE VENT
_ -
GASOLINE INTAKE
GAS LINE CONNECTION
LOW SPEED JET TUBE:
11/4" 11/32" 11/16" 13/16"
3/8"
ID Dr. 38 Dr. 5/16"
By Pass in Body
__..
Economizer in Body
__
Idle Bleed
IDLE PORT:
Slot Type: Length_ -.__
Width..__._.___ Dumbell Type: Length_
Width__.
Dia. Hole at Top._
Dia. Hole at Bottom__ Key Hole Type: Length _
Width.____
Dia. Hole at Bottom
IDLE PORT OPENING (yalvs
Closed)
Round
.176" .040"
03 I" to .035"
72 Dr. 55 Dr. 48 Dr.
Idle Screw Seat_
IDLE ADJUSTMENT SCREW: Turns open..
MAIN NOZZLE:
1/2 to I
Size: Screw Nozzle
Size: Slip Nozzle.___._
METERING ROD: 1st Step___- 2nd
3rd Step _-_._.- __
Power Step
__..__.-._
Length of Rod-.... .._.
METERING ROD JET METERING ROD GAUGE_. . ACCELERATING PUMP:
Low Pressure Type Adjustable Stroke
Pump Bleed Jet
_.
Discharge Jet Size..___ Intake Ball Check__ Discharge Ball Check__ Intake Disk
Check_ Discharge Disk Check_
THROTTLE LEVER: At Left-
In Center of Travel Points
Forward-Length _
CHOKER:
Butterfly Valve Type_
CHOKER LEVER: At Left-
When Open (Position)
TUBE SUPPORT BRACKET:
On Air Horn Located at._.-
.044"
3 25/64" 45 Dr.
T I09-25
72 Dr. 62 Dr. 45 Dr.
13/16" Split Down
30'
40 Dr.
.056"
Left